Caution: • Don't disconnect the device from the computer or power it off during the repair process. The device may automatically restart a few times during the software repair process, which takes approximately 15 minutes. • The most recent software version becomes available on the SUA/SRA tool within a week of a new software update. During this time, the SUA/SRA is unavailable for usage.

Windows • Ensure the wireless device: • is powered on and able to be unlocked if necessary • connected to a compatible computer using the supplied USB cable. • Ensure the Software Upgrade Assistant (SUA) software is installed. Refer to for assistance.

• Connect your device to a computer that has HTC Sync Manager installed. If prompted, disable device lock setting, reconnect the wireless device then click OK. • Click Repair. If desired, check 'Open HTC Sync Manager when a phone is connected' to enable. • From the Software Repair Assistant (SRA) page, select the applicable device then click Repair.

Inside the Upgrade Assistant you will find a 'Repair Assistant'. Pressing start will begin the download of the stock file. This can be installed on the Mac or Windows. Ensure the Software Upgrade Assistant (SUA) software is installed. From the taskbar (located in the lower right of the desktop), right-click the Software Upgrade Assistant tray icon. Click Launch Verizon Software Upgrade Assistant. Click Repair Assistant (located on the left) then click Run Repair Assistant.

The software repair begins once the software repair package is downloaded and progress of the download and repair show via a status bar. • When prompted, click OK to complete repair process. • Click Close (located at the bottom right) to exit the Software Repair Assistant. Related Topic: Macintosh • Ensure the wireless device: • is powered on • connected to a compatible computer using the supplied USB cable. If prompted, disable device lock setting then reconnect the wireless device. If the device is not recognized immediately, pull down the notification panel on the phone to switch from 'Charge Only' to 'File Transfer' or 'Software Installation' mode and set USB Debugging mode to on the device. • Ensure the Software Upgrade Assistant (SUA) software is installed. Champions of norrath ps2 emulator.

Refer to for assistance. • After the device is connected, click Transfer & Backup then click File transfer. • Select the device to be repaired then click Repair. The repair process takes around 10-15 minutes. • When the repair is complete, click OK then click Close. The phone will restart automatically.