Kenmore 44042 Front Load Washer, 417 manual model related issues. Get free help, solutions & advice from top Kenmore experts.

• 15935 Answers SOURCE: “F21” (AKA SD) is a Long (SLOW) Drain error (LD). If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. You will need to check the following: 1.First, attempt to unplug the washer for at LEAST 30 minutes to reset the Central Control Unit (CCU). Sometimes this is all that is required to correct momentary glitches with the unit.

If the error code returns, proceed to step 2. 2.Check the drain hose to make sure it is not kinked or clogged. 3.Check the electrical connections to the pump and ensure the pump is running. 4.Remove the drain pump filter and check for foreign objects and/or debris. To check the drain pump, click on the following link for step-by-step instructions If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question Posted on Sep 11, 2010.

That link for a previous answer that Yadira B. Posted in the above response discusses the same problem in a slightly different type of washer. You could have a clog in that dispenser.

Remove the dispenser drawer and check for an item that could be stuck in the housing underneath the dispenser drawer. Clean the dispenser including the siphon holes in that component. These tips may help you fix that problem. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician examine the washer and repair this problem, you can schedule service through this link. Sivapuranam tamil download. The timer sends some voltage codes to the motor control board. Assuming that the wire harness connections between the timer and the motor control board are good, replacing the timer should fix your problem.

I posted the procedure for replacing that timer in the image below. That information should help you fix that problem. Be sure that you unplug the washer before accessing and replacing internal components. You can order that timer from this page:. If you need more help, reply with additional details. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link:.

FREE Standard Shipping on orders of $90 or more Purchase requirement calculated before taxes and shipping charges and after other discounts have been applied and must be made in a single transaction. Cannot be applied to previous purchases and cannot be redeemed for cash. Valid for standard ground shipping within the continental United States and not valid for shipments to Alaska, Hawaii, Puerto Rico, Guam and the US Virgin Islands. Offer valid for online purchases only. In an event of a return, coupon savings may be deducted from your refund. Discount will be automatically applied during check-out.

Sears Holdings reserves the right to terminate or modify this offer at any time for failure to comply with its terms and/or due to any operational malfunction of the software, hardware or equipment required to process this offer. © 2013 Sears Brands, LLC. May not be used with any other coupon, associate discount, or during Family & Friends or Member events. 365 Day Return Policy You may return an unused and uninstalled part in its original packaging. To return a part, enter your order number/zipcode above and continue through the return process to obtain a Return Authorization number.

We must receive the returned part(s) with the Return Authorization number within 365 days of your original order date. Exclusions apply to products with limited shelf life, which includes but are not limited to batteries, smoke detectors, or chemical based products; these products must be returned within 90 days of the original order date. Items received damaged must be reported within 10 days of receipt. Credit will be issued for the part(s) plus tax, minus any shipping charges.